Skip to content
Call: +44207 1250071 Email: info@epicuro.co.uk
Chemcrete PAVIX CCC100

Chemcrete PAVIX CCC100

CHEM-CRETE PAVIX CCC100 is an environmentally friendly, water-based, penetrating sealer designed to protect concrete against problems associated with temperature and water, such as thermal cracking, freeze/thaw cycles, chloride ion penetration and helps reduce alkali silicate reactions all in a single application. 

Currently unavailable in the UK - we recommend Epicuro Hydrophobic Protection as an equivalent alternative.

Sold out
£390.00 - £390.00
£390.00
£390.00 - £390.00
£390.00
What can Chemcrete PAVIX CCC100 be used for?

Chem-Crete PAVIX CCC100 can be used as a treatment and protection against water and moisture associated problems for all concrete and cementitious structures. Airport Runways 

  • Airport Taxiways 
  • Aircraft Parking 
  • Bridges 
  • Tunnels 
  • Concrete Roads-Highways 
  • Parking Lots 
  • Buildings 
  • Sea Ports 
  • Walkways 
What are the key features and benefits?
  • Can be used on fresh poured concrete & existing concrete. 
  • 100% Green, environmentally safe & non-toxic. 
  • Eliminates damage caused by repeated freezing and thawing cycles. 
  • Prevents concrete scaling. 
  • Seals and protects cracks up to 1/16th inch (1.5 mm). 
  • Reduces Alkali Silica Reactions (ASR), and eliminates silicate dusting. 
  • Can help reduce Calcium Oxychloride reaction due to use of magnesium chlorides 
  • Reduces and/or eliminates early joint deterioration 
  • Prevents penetration of chloride ions from de-icing salts. 
  • Excellent repelling properties that help prevent water, jet fuel and oil from over saturating into the surface. 
  • Helps concrete stay whiter and brighter 
  • Resists aggressive chemicals such as acids & caustics. 
  • Protects reinforcing steel bars against corrosion without any negative effect on existing steel cathodic protection. 
  • Increases joint sealant adhesion by preventing moisture intrusion through the joint material bond line. 
  • Can be applied on vertical, horizontal & overhead surfaces 
  • Provides long lasting internal waterproofing and moisture blocking from positive and negative sides. 
  • Reduces or eliminates fungal growth.
Download TDS

As with all construction chemical products, adequate precautions and care must be taken during usage and storage. Avoid direct contact with foodstuff, eyes, skin, and mouth. Any direct contact with skin should be washed thoroughly with clean running water and soap. 

Always wear protective goggles and gloves. In case of eye contact, flush for 15 minutes with warm water. If eye irritation persists, seek medical attention. In case of ingestion or swallowing drink 2 glasses of clean water and seek medical attention.

Keep out of reach of children. 

Specific Gravity: 1.1 – 1.2 

Viscosity: 2.4 centipoises 

Freezing Point: 28ºF (-4°C) 

Boiling Point: 219ºF (104 °C) 

Color: Clear 

Environmental Hazards: None 

Odor: None 

Toxicity: None 

Fumes: None 

Flammability: None 

Use for treatment and protection against water and moisture associated problems for all concrete and cementitious structures. 

Freshly Placed Concrete: After the desired finish has been achieved (i.e. broom finish), and the concrete supports foot traffic, apply Chem-Crete PAVIX CCC100 within a minimum of 30 minutes up to 8 hours depending upon ambient conditions. Apply at a coverage rate of 150 sq. ft. per gallon in one (1) coat. Do not allow the product to puddle. Make sure surface has no bleed water and is strong enough to support the applicator's weight. 

Curing Compound Required: After the Chem-Crete PAVIX CCC100 application is dry, or a minimum of 30 minutes, proceed to apply a D.O.T. approved curing compound to continue the concrete's curing process. 

Fully Cured or Existing Concrete: Repair and seal joints, cracks and voids greater than 1/16th inch prior to application. Concrete surfaces must be clean and sound prior to application of the product. Proper cleaning will open the surface pores and capillaries to enhance the penetration process. Compressed air can be used to remove dust and loose particles from the surface. Flushing the area to be treated with water can improve the cleaning process, however for heavily contaminated areas; special concrete cleaning agents such as Chem-Crete CONCLEAN CCC060 can be used to remove dirt, grease and oil from those areas. 

For large-scale applications, such as airport runways, it is recommended to spray the product using a heavy-duty commercial sprayer. 

Product Overview

CHEM-CRETE PAVIX CCC100 is an environmentally friendly, water-based, penetrating sealer designed to protect concrete against problems associated with temperature and water, such as thermal cracking, freeze/thaw cycles, chloride ion penetration and helps reduce alkali silicate reactions all in a single application. 

Chem-Crete PAVIX CCC100 uses patented dual crystalline technology that keeps treated concrete reasonably dry, thus helping to eliminate most water and moisture associated problems. The protective properties are a distinctive water repellent and crystallization process of hygroscopic and hydrophilic technology, providing a triple action moisture blocker system. 

Chem-Crete PAVIX CCC100 contains no VOC’s, environmentally safe, non-toxic and is easy to apply. It is ideal for roads, bridges, airports, parking garages and other areas where moisture and freeze/thaw cycles are detrimental to concrete. Chem-Crete PAVIX CCC100 will prolong the life span of the concrete and will dramatically reduce maintenance cost. 

Key Information

What's the environmental impact of Chemcrete PAVIX CCC100?

100% Green, environmentally safe & non-toxic. 

What is the packaging and storage?

5gal(US) containers

What are the coverage stats for Chemcrete PAVIX CCC100?

5m2/ltr

What are the application guidelines for Chemcrete PAVIX CCC100?

Apply by roller, brush or sprayer.

Important Notice

The content of this documentation is based on our experience of the product. Epicuro Protective Materials Ltd guarantees the quality of its products, but expressly declines any liability in the event of failure by the user to comply with the recommendations and conditions of use of said products, notably but not exclusively in the event of incorrect application, application by unqualified personnel, use of products not compatible with Epicuro’s products or bad weather conditions. For further information, refer to the safety data sheet.